Introduction to massage bathtub functions

Table of contents

Introduction

The massage bathtub comprises a cylinder body, a cylinder edge is arranged on the cylinder body, a shower head and a switch are arranged on the cylinder edge, the cylinder body is round, and a surfing nozzle and a bubble nozzle are arranged in the cylinder body. The utility model has the characteristics of convenient bathing and good massage effect, and is a sanitary ware suitable for use in homes, hotels and other places.

The massage bathtub mainly uses the movement of the motor to make the nozzles on the inner wall of the bathtub spray water mixed with air, causing the water to circulate, thus producing a massage effect on the human body. As long as the bathtub is filled with water, it can operate self-sufficiently. There is a water inlet at the bottom of the bathtub, from which water is sucked into the water pump and then flows back into the bathtub through the nozzles installed on both sides of the bathtub. At this time, air is sucked in from the air inlet and mixed with the water at the nozzle. The air volume can be adjusted by rotating the edge of each nozzle.

The benefits of a massage bathtub

1. Fitness treatment:
First, drink a glass of room temperature water to help clean the body circulation system. The water temperature should be 34℃. Start the hydromassage system and run it for 8-10 minutes. During this time, the massage water flow can relieve the nerve tension on the surface of the skin. Shower with 20℃ water in the following way: from left foot to buttocks, from right foot to buttocks, from left hand to shoulder, from right hand to shoulder (all from bottom to top), place the shower head on the abdomen, and place the shower head under the back.

2. Stress relief:
Fill the bathtub with 36℃ water. You can add some water-soluble bath oil with a relaxing effect to enhance the effect of hydromassage. Start the air massage system and run it for 3 minutes. Let the bubbles coming out from the bottom relax the muscle tissue and increase the elasticity of the skin. If your massage bathtub only has a hydromassage system, use the air adjustment switch to adjust the air volume to the maximum (water and air are sprayed out after mixing through the nozzle); start the air massage system and the hydromassage system and run them for 10 minutes. If your massage bathtub only has a hydromassage system, use the air adjustment switch to adjust the air volume to medium. During these 10 minutes, the massage water provides effective relief for muscle tissue by relieving nerve tension on the surface of the skin, while accelerating blood circulation in the body; finally, repeat the steps for 3-5 minutes to increase the relaxation effect; when all this process is over, it is recommended to drink a glass of water at the same temperature as room temperature, lie on the bed to rest and stretch your body as much as possible. You can do this bath 2-3 times a week.

Cleaning and maintenance of massage bathtub

Cleaning of massage bathtubs
1. For daily cleaning of massage bathtubs, general liquid detergents and soft cloths can be used. Do not use detergents containing ketone or chlorine water. When disinfecting, disinfectants containing formic acid and formaldehyde are prohibited.
2. It is recommended to use granular detergents that can be mixed with water to clean massage bathtubs, and avoid using detergents for tile or enamel surfaces.
3. Do not place containers containing liquid detergents on the bathtub surface for a long time, and do not use sprays or concentrates or other similar cleaning products.
4. Please do not let nail polish, nail polish remover, dry liquid detergent, acetone, paint remover or other solvents come into contact with the acrylic surface.
5. Corrosive detergents staying on the acrylic surface will cause damage. Be careful to thoroughly clean the acrylic surface after each use and do not let the detergent enter the circulation system.

Maintenance of massage bathtubs
1. If there are scratches on the surface of the bathtub, just use 2000# water-abrasive sandpaper to polish it, apply toothpaste, and polish it with a soft cloth to make it as bright as new.
2. The scale on the surface of the bathtub can be wiped with a soft cloth after adding a mildly acidic detergent such as lemon juice or vinegar and heating it slightly.
3. Cleaning the hydraulic friction device Fill the bathtub with 40 degrees Celsius hot water, add 2 grams of detergent per liter, start the hydraulic massage for about 5 minutes, stop the pump to drain, then fill it with cold water, start the hydraulic massage for about 3 minutes, stop the pump to drain and clean the bathtub.
4. If the surface of the tank is dirty, it can be wiped with a wet towel. This process can be repeated three times to make it as bright as new.
5. Do not use rough surfaces and utensils containing chemical solvents or particles to clean the surface of the tank.
6. Do not use hard objects or blades to knock and scratch the surface of the bathtub, and do not let cigarette butts or heat sources above 70 degrees Celsius contact the surface of the bathtub.
7. After using the bathtub, drain the water and disconnect the power supply.
8. If the return device and nozzle are blocked by hair or other debris, they can be unscrewed for cleaning.
9. Gold-plated and chrome-plated parts do not need to be wiped frequently.

The Jacuzzi bathtub uses its powerful massage function to allow users to have a perfect shower time after a busy day.J-Stato is a sanitary ware company located beside the beautiful West Lake in Hangzhou, founded in 2019. We specialize in luxury massage bathtubs, steam shower rooms and bathroom cabinets. As a one-stop solution provider, we not only provide products, but also provide a full range of services such as product design, tooling and product photo shooting. Our products are sold all over the world, including Canada, the United States, Germany, France, Italy, Poland, New Zealand and Australia, etc. Our team members are experienced and skilled professionals. We use the most advanced technology and workmanship to manufacture high-quality products and provide customers with reliable solutions.If you need any massage bathtub, please contact us.


Post time: Mar-26-2025